VTH13121-1100 - Battery Eliminator Tx 90vDC 7.5vDC

Links

  • Order Code: VTH13121-1100.
  • Issue: 7.
  • Page Updated: 06 Feb 2017.
  • Change Request: X50465.
  • Release Note: Y11163.
Picture:dpc12710.jpg

Specification

  • Primary: 10-0-200-220-240 VRMS 50/60Hz.
  • Output: 65-0-65VRMS 50mADC 4.9-0-4.9VRMS 80mADC.
  • Construction: Iron Laminated. Double insulated.
  • Treatment: Vacuum Varnish Impregnated.
  • Application: HT Anode and Heater supplies.
  • Range: Standard.

Mounting Arrangement

Picture:dpm12796.gif

Mechanical Dimensions

  • Size = Patt35x3/4 UC.
  • Width (W) = 2 5/16 inch (59mm).
  • Clamp Width (C) = 3 1/2 inch (89mm).
  • Depth (D) = 1 1/2 inch (38mm).
  • Height (H) = 1 15/16 inch (49mm).
  • Core (L) = 3/4 inch (19mm).
  • Fix Centres (F) = 3 inch (76mm).
  • Fix Size (FZ) = 3/16 inch (M4) .
  • Pin Length (P) = 1/4 inch (6mm).
  • Weight (WT) = To be added later.

Circuit

Picture:dpe12581.gif Picture:dpe12582.gif Picture:dpe12734.gif

Connections

Function Connection
HT Anode A Pin 10
HT Centre(Ground) Pin 9
HT Anode B Pin 8
Heater A Pin 7
Heater Centre Pin 1
Heater B Blue+Red marker wire (B)
Heater B Pin 6
Heater B Blue+Red marker wire (B)

Connection Layout

Picture:dpm14570.gif Picture:dpm14571.gif

Front

Back

Application Notes


  • Safety note: Warning. This part may be connected to high voltage. Disconnect then discharge for 5 minutes before working on circuit.
  • See also Links on Left of this page.

© 2017 Variable Voltage Technology Ltd