VTH13120-1440 - Battery Eliminator Tx 90vDC 1.4vDC

Links


  • Order Code: VTH13120-1440.
  • Issue: 7.
  • Page Updated: 06 Feb 2017.
  • Change Request: X50465.
  • Release Note: Y11162.
Picture:dpc12712.jpg

Specification

  • Primary: 10-0-200-220-240 VRMS 50/60Hz.
  • Output: 65-0-65 VRMS 50mADC 1.4-0-1.4VDC 300mADC.
  • Construction: Iron Laminated. Double insulated.
  • Treatment: Vacuum Varnish Impregnated.
  • Application: HT Anode and Heater supplies.
  • Range: Standard.

Mounting Arrangement

Picture:dpm12799.gif

Mechanical Dimensions

  • Size (SZ) = Patt35x3/4 FS.
  • Width (W) = 1 15/16 inch (49mm).
  • Depth (D) = 2 3/16 inch (56mm).
  • Height (H) = 2 5/16 inch (59mm).
  • Fix Centres (FWxFD) = 1 3/8 inch x 1 3/8 inch (35mm x 35mm).
  • Fix Size (FZ) = 5/32 inch (M3).
  • Weight (WT) = To be added later.

Circuit

Picture:dpe12581.gif Picture:dpe12582.gif Picture:dpe12734.gif

Connections

Function Connection
10 Volts Mauve wire
0 Volts Blue wire
200 Volts Yellow wire
220 Volts Orange wire
240 Volts Red wire
HT Anode A Red wire (A)
HT Centre(Ground) Black wire
HT Anode B Red wire (B)
Heater A Blue+Blue marker wire (A)
Heater Centre Black+Black marker wire
Heater B Blue+Red marker wire (B)

Connection Layout

Picture:dpm14626.gif Picture:dpm14578.gif

Below


Application Notes


  • Safety note: Warning. This part may be connected to high voltage. Disconnect then discharge for 5 minutes before working on circuit.
  • See also Links on Left of this page.

© 2017 Variable Voltage Technology Ltd