VTH13120-1300 - Battery Eliminator Tx 90vDC 1.4vDC

Links


  • Order Code: VTH13120-1300.
  • Issue: 7.
  • Page Updated: 06 Feb 2017.
  • Change Request: X50465.
  • Release Note: Y11162.
Picture:dpc12737.jpg

Specification

  • Primary: 10-0-200-220-240 VRMS 50/60Hz.
  • Output: 65-0-65 VRMS 50mADC 1.4-0-1.4VDC 300mADC.
  • Construction: Iron Laminated. Double insulated.
  • Treatment: Vacuum Varnish Impregnated.
  • Application: HT Anode and Heater supplies.
  • Range: Standard.

Mounting Arrangement

Picture:dpm12798.gif

Mechanical Dimensions

  • Size (SZ) = Patt35x3/4 DT.
  • Width (W) = 2 5/16 inch (59mm).
  • Depth (D) = 1 15/16 inch (49mm).
  • Height Above (HA) = 1 15/32 inch (37mm).
  • Height Below (HB) = 3/8 inch (10mm).
  • Fix Centres (FWxFD) = 1 5/8 inch x 1 1/2 inch (41mm x 38mm).
  • Cutout Hole (CWxED) = 1 1/2 inch x 1 7/8 inch (39mm x 48mm) ES.
  • Fix Size (FZ) = 5/32 inch (M3).
  • Weight (WT) = To be added later.

Circuit

Picture:dpe12581.gif Picture:dpe12582.gif Picture:dpe12734.gif

Connections

Function Connection
10 Volts Pin 11
0 Volts Pin 12
200 Volts Pin 13
220 Volts Pin 14
240 Volts Pin 15
HT Anode A Pin 10
HT Centre(Ground) Pin 9
HT Anode B Pin 8
Heater A Pin 7
Heater Centre Black marker wire
Heater B Pin 6

Connection Layout

Picture:dpm14570.gif

Below


Application Notes


  • Safety note: Warning. This part may be connected to high voltage. Disconnect then discharge for 5 minutes before working on circuit.
  • See also Links on Left of this page.

© 2017 Variable Voltage Technology Ltd